TECHNICAL: GIVE YOURSELVES A 3D PRINTER, LADIES & GENTLEMEN!

I AM UPDATING THIS ARTICLE RIGHT NOW WITH MORE TEXT , PICTURES ETC.
ALWAYS GO BACK TO UPDATE ON ALL ARTICLES, FROM TIME TO TIME.
SO NO WEBPAGE EVER FINISH.
PLEASE RETURN LATER TODAY APRIL 3 2018 - LIKE IN 4 HOURS.
-update- In half an hour 4 hours has passed, but some things that need my attention came up.
So this article post can be -as the only one on site- HALFREADY until later, as an exception.
I can unpublish it, but also keep it up online, since you get the text about 3D printing to read and the book 3D printing for dummies to download on this page.
I guess 3 days estimated time before ready and this is a complete article. The other article I am working on is "What you didn't know about the Cuba'n missile crisis!".
Welcome!

Printing 3D, also known as additive manufacturing (AM), are processes used to synthesize a three-dimensional object in which successive layers of material are formed under computer control to create the object. These objects can be of almost any shape or geometry and are produced from digital model data 3D model or other electronic data source such as an Additive Manufacturing File (AMF) file. Early Additive Manufacturing (or AM) equipment and materials were developed in the 1980s.

3D printable models may be created with a computer aided design (CAD)
package, via a 3D scanner, or by a plain digital camera and
photogrammetry software. 3D printed models created with CAD result in Printing 3D, also known as additive manufacturing (AM), are processes used to synthesize a three-dimensional object in which successive layers of material are formed under computer control to create the object. These objects can be of almost any shape or geometry and are produced from digital model data 3D model or other electronic data source such as an Additive Manufacturing File (AMF) file. Early Additive Manufacturing (or AM) equipment and materials were developed in the 1980s.

3D printable models may be created with a computer aided design (CAD)
package, via a 3D scanner, or by a plain digital camera and
photogrammetry software. 3D printed models created with CAD result in
reduced errors and can be corrected before printing, allowing
verification in the design of the object before it is printed.

The manual modeling process of preparing geometric data for 3D computer
graphics is similar to plastic arts such as sculpting. 3D scanning is a
process of collecting digital data on the shape and appearance of a real
object, creating a digital model based on it.

Large 3D printers have been developed for industrial, education, and
demonstrative uses. A large delta-style 3D printer was built in 2014 by
SeeMeCNC. The printer is capable of making an object with diameter of up
to 4 feet (1.2 m) and up to 10 feet (3.0 m) in height. It also uses
plastic pellets as the raw material instead of the typical plastic
filaments used in other 3D printers.

Another type of large printer is Big Area Additive Manufacturing
(BAAM). The goal is to develop printers that can produce a large object
in high speed. A BAAM machine of Cincinnati Incorporated can produce an
object at the speeds 200-500 times faster than typical 3D printers
available in 2014. Another BAAM machine is being developed by Lockheed
Martin with an aim to print long objects of up to 100 feet (30 m) to be
used in aerospace industries

In early 2014, the Swedish supercar manufacturer, Koenigsegg,
announced the One:1, a supercar that utilizes many components that were
3D printed. In the limited run of vehicles Koenigsegg produces, the
One:1 has side-mirror internals, air ducts, titanium exhaust components,
and complete turbocharger assemblies that were 3D printed as part of
the manufacturing process.




In 2012, the US-based group Defense Distributed disclosed plans to
design a working plastic gun that could be downloaded and reproduced by
anybody with a 3D printer. Defense Distributed has also designed a 3D
printable AR-15 type rifle lower receiver (capable of lasting more than
650 rounds) and a 30 round M16 magazine.




This is a 3D Printed Sniper Rifle from the PC-game Fallout-3 made as a working paintball-gun.

In October 24, 2014, a five-year-old girl born without fully formed
fingers on her left hand became the first child in the UK to have a
prosthetic hand made with 3D printing technology.

3D printing is also being utilized by air forces to print spare parts
for planes. In May 2015 Airbus announced that its new Airbus A350 XWB
included over 1000 components manufactured by 3D printing.




HOW MUCH DOES A 3D PRINTER COST?



For home and small business use, around $800 - $ 3000 US.
How much does it cost to print a smaller 3D object?

-About and around $ 10 for a 100 gram object. (Including material, electricity etc.)

And it takes around 5 hours to make it using the MakerBot2.



ZYYX 3D Printer.


LEARN MORE ABOUT 3D PRINTING HERE:



Use the zoom function below in the viewer window as you wish. It can take a while, a minute or so, to load the library book in the viewer
because it's on 48 MB, but then it works. It loads automatically. You
can also download the e-book from our library for offline reading. Just
click book cover below.


-CLICK HERE-
TO DOWNLOAD 3D PRINTING FOR DUMMIES NOW!




Industrial use



3D printer Optomec LENS 850R in process.





This is how 'they' believe houses will be built in the future. A few attempts have been made so far and they are promising.





This post will be expanded later... Please return.

Have a great political life and please 3D print a CYBORG!





reduced errors and can be corrected before printing, allowing
verification in the design of the object before it is printed.

The manual modeling process of preparing geometric data for 3D computer
graphics is similar to plastic arts such as sculpting. 3D scanning is a
process of collecting digital data on the shape and appearance of a real
object, creating a digital model based on it.

Large 3D printers have been developed for industrial, education, and
demonstrative uses. A large delta-style 3D printer was built in 2014 by
SeeMeCNC. The printer is capable of making an object with diameter of up
to 4 feet (1.2 m) and up to 10 feet (3.0 m) in height. It also uses
plastic pellets as the raw material instead of the typical plastic
filaments used in other 3D printers.

Another type of large printer is Big Area Additive Manufacturing
(BAAM). The goal is to develop printers that can produce a large object
in high speed. A BAAM machine of Cincinnati Incorporated can produce an
object at the speeds 200-500 times faster than typical 3D printers
available in 2014. Another BAAM machine is being developed by Lockheed
Martin with an aim to print long objects of up to 100 feet (30 m) to be
used in aerospace industries

In early 2014, the Swedish supercar manufacturer, Koenigsegg,
announced the One:1, a supercar that utilizes many components that were
3D printed. In the limited run of vehicles Koenigsegg produces, the
One:1 has side-mirror internals, air ducts, titanium exhaust components,
and complete turbocharger assemblies that were 3D printed as part of
the manufacturing process.



In 2012, the US-based group Defense Distributed disclosed plans to
design a working plastic gun that could be downloaded and reproduced by
anybody with a 3D printer. Defense Distributed has also designed a 3D
printable AR-15 type rifle lower receiver (capable of lasting more than
650 rounds) and a 30 round M16 magazine.


This is a 3D Printed Sniper Rifle from the PC-game Fallout-3 made as a working paintball-gun.

In October 24, 2014, a five-year-old girl born without fully formed
fingers on her left hand became the first child in the UK to have a
prosthetic hand made with 3D printing technology.

3D printing is also being utilized by air forces to print spare parts
for planes. In May 2015 Airbus announced that its new Airbus A350 XWB
included over 1000 components manufactured by 3D printing.




HOW MUCH DOES A 3D PRINTER COST?



For home and small business use, around $800 - $ 3000 US.
How much does it cost to print a smaller 3D object?

-About and around $ 10 for a 100 gram object. (Including material, electricity etc.)

And it takes around 5 hours to make it using the MakerBot2.


ZYYX 3D Printer.


LEARN MORE ABOUT 3D PRINTING HERE:



Use the zoom function below in the viewer window as you wish. It can take a while, a minute or so, to load the library book in the viewer
because it's on 48 MB, but then it works. It loads automatically. You
can also download the e-book from our library for offline reading. Just
click book cover below.

-CLICK HERE-
TO DOWNLOAD 3D PRINTING FOR DUMMIES NOW!









This post will be expanded later... Please return.

Have a great political everyday life and please 3D print me an attack CYBORG to go after the Trump Administration with ! :)




MAGAZINE ADVERTISEMENT

MAGAZINE ADVERTISEMENT